Furthermore the reverse camera doesn't show and the parking sensors don't work. There aren't any dings or noises as there usually is. Took the battery off for half hour, left the seat disconnected, and still exactly the same after reconnecting the battery (leaving the seat unplugged). Page 41 Locks Locking and unlocking the If the driver’s door is the first door which is opened, the other doors and the doors with the key blade luggage compartment lid will remain Type 1 locked. All the other doors can be unlocked from inside the vehicle by pressing the unlock button next to the driver’s door handle. Remove the inside door panel. Be careful with power window switch and door speaker wiring connectors. Disconnect them before pulling the door panel away. Remove any plastic covers that may be glued to the door. Have a look at the door handle from inside the door. You will have some idea as to how to remove it. The latch (visible when the door is open) was sticking open so the door just kept bouncing back. I used lithium grease (spray can) and a screwdriver to move the mechanism back and forward to work in the grease. I'd tried wd40 beforehand and a rag to clean the mechanism. The WD40 on its own wasn't enough to solve the problem. True Ford Enthusiast. 23.8k. Name: James. Ford Model: Sea Grey Mondeo MKIV 1.8TDCi 140ps Zetec. Ford Year: 2007. UK/Ireland Location: Kent. Posted March 25, 2015. open both doors, twist the key in the child lock mechanism three times both directions and try again. 1. Vocational, Technical or Tra 221 satisfied customers. The remote central locking key control on my Wifes 06 Fusion. The remote central locking key control on my Wifes 06 Fusion 1.4 Zetec has stop working, have tried new battery still won't work, All the doors lock and … read more. Turn OFF the ignition. Lock the door using the button on the door handle. Then unlock the door (but do not open it) three times. Turn on the ignition but don’t start the engine - you will hear a distinctive beep. Lock the door again as before then unlock it (only once this time) - a final beep will be heard. Your. Preferably wait approximately 10 minutes. Procedure. 1. Move the seat fully rearwards (using either the manual or electric method). 2. Using a T50 Torx bit remove the front 2 seat retaining bolts, from the seat runners. 3. Move the seat forwards (using either the manual or electric method). I9rI2H.

ford mondeo mk4 door lock problem